DVP-ES3 Series Programming Manual Example 1. When M0 is ON, the DFLT instruction converts the values in (D1, D0) and (D3, D2) into floating-point numbers, and stores the conversion results in (D11, D10) and (D13, D12) respectively. 2. When M1 is ON, the FPOW instruction raises the floating-point number in (D11, D10) to the power of the floating-point number in (D13, D12), and stores the operation result in (D21, D20). 3. When M2 is ON, the FBCD instruction converts the binary floating-point number in (D21, D20) into the binary-coded decimal floating-point number, and stores the conversion result in (D31, D30).
_6 Additional remarks If the value in S 1 is less than 0, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 6-474