DVP-ES3 Series Programming Manual + D0 D1 D2 8 ( Hour ) 10 ( Minute ) 20 ( Second ) D11 D12 D10 6 ( ) Hour 40 ( ) Minute 6 ( ) Second D20 D21 D22 14 ( ) Hour 50 ( ) Minute 26 ( ) Second 8 hour 10 minute 20 second 6 hour 40 minute 6 second 14 hour 50 minute 26 second Additional remarks 1. If the value in S 1 or S 2 exceeds the range, an operation error occurs, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 2. If S 1 +2, S 2 +2, or D +2 exceeds the device range, an operation error occurs, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003. 3. If you declare the operand S 1 in ISPSoft, the data type is ARRAY [3] of WORD/INT. 4.
If you declare the operand S 2 in ISPSoft, the data type is ARRAY [3] of WORD/IN. _6 5. If you declare the operand D in ISPSoft, the data type is ARRAY [3] of WORD/INT. 6-482