7 Application Instructions API 50-99 DVP-PLC APPLICATION MANUAL 7-15 Flag Function M1332 Enable Start/Reset of C239 M1333 Enable Start/Reset of C240 Special D Function D1022 Multiplied frequency of A-B phase counters for ES/SA series MPU D1150 Table counting register for DHSZ multiple set values comparison mode D1151 Register for DHSZ instruction frequency control mode (counting by table) D1152 (low word) D1153 (high word) In frequency control mode, DHSZ reads the upper and lower limits in the table counting register D1153 and D1152.
D1166 Switching between rising/falling edge counting modes of X10 (for SC series MPU only) D1167 Switching between rising/falling edge counting modes of X11 (for SC series MPU only) D1225 The counting mode of the 1st group counters (C241, C246, C251) D1226 The counting mode of the 2nd group counters (C242, C247, C252) D1227 The counting mode of the 3rd group counters (C243, C248, C253) D1228 The counting mode of the 4th group counters (C244, C249, C254) D1225 ~ D1228 Counting modes of HHSC0 ~ HHSC3 in EH/EH2/SV/EH3/SV2 series MPU (default = 2) 1: Normal frequency counting mode 2: Double frequency counting mode 3: Triple frequency counting mode 4: 4 times frequency counting mode