7 Application Instructions API 50-99 Program Example: When X0 = On, Y1 will output the pulses as below. When X0 = Off, Y1 output will also be Off. X0 t=1,000ms Y1 output T=2,000ms Remarks: 1. Flags for ES/EX/SS/SA/SX/SC series MPU: M1070: Y1 pulse output time unit switch. When Off: 1ms; when On: 100us 2. Flags and special registers for EH/EH2/SV/EH3/SV2 series MPU: M1010: (EH/EH2/SV/EH3/SV2) When On, CH0, CH1, CH2 and CH3 will output pulses when END instruction is executed. Off when the output starts. M1070: (EH/EH2/SV/EH3/SV2) The setting of time unit of CH0 has to work with D1371. M1071: (EH/EH2/SV/EH3/SV2) The setting of time unit of CH1 has to work with D1372. M1258:
(EH/EH2/SV/EH3/SV2) CH0 pulse output signals reverse. M1259: (EH/EH2/SV/EH3/SV2) CH1 pulse output signals reverse. M1334: (EH/EH2/SV/EH3/SV2) CH0 pulse output pauses. M1335: (EH/EH2/SV/EH3/SV2) CH1 pulse output pauses. M1336: (EH/EH2/SV/EH3/SV2) CH0 pulse output has been sent. M1337: (EH/EH2/SV/EH3/SV2) CH1 pulse output has been sent. M1520: (EH2/SV/EH3/SV2) CH2 pulse output pauses. M1521: (EH2/SV/EH3/SV2) CH3 pulse output pauses. M1522: (EH2/SV/EH3/SV2) CH2 pulse output has been sent. M1523: (EH2/SV/EH3/SV2) CH3 pulse output has been sent. M1526: (EH2/SV/EH3/SV2) CH2 pulse output signals reverse. M1527: (EH2/SV/EH3/SV2) CH3 pulse output signals reverse. M1530:
(EH2/SV/EH3/SV2) The setting of time unit of CH2 has to work with D1373. M1531: (EH2/SV/EH3/SV2) The setting of time unit of CH3 has to work with D1374. D1336: (EH/EH2/SV/EH3/SV2) Low word of the current number of output pulses from CH0. D1337: (EH/EH2/SV/EH3/SV2) High word of the current number of output pulses from CH0. D1338: (EH/EH2/SV/EH3/SV2) Low word of the current number of output pulses from CH1. D1339: (EH/EH2/SV/EH3/SV2) High word of the current number of output pulses from CH1. D1371: (EH/EH2/SV/EH3/SV2) Time unit of CH0 output pulses when M1070 = On. D1372: (EH/EH2/SV/EH3/SV2) Time unit of CH1 output pulses when M1071 = On. DVP-PLC APPLICATION MANUAL 7-36 PWM K1000 K2000 Y1 ut