7 Application Instructions API 50-99 Program Example 2: K9 m = K9 1. Set up total number of pulses, total time, ramp-up time and ramp-down time in source device starting with D0. Execute DTM instruction and the optimal max frequency as well as optimal start frequency can be obtained and executed by positioning instructions. 2. Assume the data of source device is set up as below: 3. The optimal positioning results can be obtained as below: DVP-PLC APPLICATION MANUAL 7-70 Total Pulses Total Time Ramp-up Time Ramp-down Time D0, D1 D2 D3 D4 K10000 K200 K50 K50 Optimal max frequency Optimal start frequency D10, D11 D12 K70000 K3334