8 Application Instructions API 100-149 API 112 Operands: S ： Source floating point data D ： Destination device Explanations: 1. S can only be a floating-point constant value. 2. See the specifications of each model for their range of use. 3. This instruction is able to enter floating point values directly in S . 4. When the instruction is executed, the content in S is moved directly into D . When the instruction is not executed, the content in D will not be modified. 5. If users want to move the floating-point value in registers, they have to use DMOV. Program Example: 1. User DMOVR instruction to move 32-bit floating point data. 2.
When X0 = Off, the content in (D11 、 D10) remains unchanged. When X0 = On, the present value F1.20000004768372 will be moved to data registers (D11, D10). X0 Remarks: This instruction only supports ES V6.1, SA/SX_V1.1, SV_V1.2, EH_V1.2, EH2/SV/EH3/SV2_V1.0 and above versions. DVP-PLC Application Manual 8-23 Mnemonic Operands Function D MOVR P Move Floating Point Data Type OP Bit Devices Word Devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F DMOVR, DMOVRP: 9 steps S D * * * * * * PULSE 16-bit 32-bit EH3 SV2 EH3 EH3 ES EX SS SA SX SC EH SV ES EX SS SA SX SC EH SV ES EX SS SA SX SC EH SV SV2 SV2 0 DMOVR F1.20000004768372 D10