10 Application Instructions API 202-313 integer D10 = F80. X0 Destination value Max. Destination value =F500 D Min. Destination value =F30 Source value Max. Source value =F3000 Min. Source value =F200 S 1 =F500 0 Remarks: 1. Range of S 1 for 16-bit instruction: max. source value ≥ S 1 ≥ min. source value; -32,768 ~ 32,767. If the value falls without the bounds, the bound value will be used for calculation. 2. Range of integer S 1 for 32-bit instruction: max. source value ≥ S 1 ≥ min. source value; -2,147,483,648 ~ 2,147,483,647. If the value falls without the bounds, the bound value will be used for calculation. 3. Range of floating point S 1 for 32-bit instruction: max.
source value ≥ S 1 ≥ min. source value; following the range of 32-bit floating point. If the value falls without the bounds, the bound value will be used for calculation. 4. Please be aware that the max. source value must > min. source value, but it is not necessary that max. destination value > min. destination value. 5. Only ES_V6.2, SA/SX_V1.6, SC_V1.4, EH2/SV/EH3_V1.0 and versions above support this instruction. EH series MPU does not support this instruction. DVP-PLC Application Manual 10-6 X0 SET M1162 DMOVR F500 D100 DMOVR F3000 D0 DMOVR F200 D2 DMOVR F500 D4 DMOVR F30 D6 DSCLP D100 D0 D10