2 Functions of Devices in DVP-PLC DVP-PLC Application Manual 2-41 ES SA Off STOP RUN Special EH2 EH3 Function EX SX Attribute Latched Default M SV SV2 SS SC On RUN STOP M1094 Matrix pointer clear flag. Clearing the current value of the Pr to 0.
╳ ○ ○ ○ Off Off - R/W NO Off M1095 Matrix rotation/displacement/output carry flag ╳ ○ ○ ○ Off Off - R NO Off M1096 Matrix displacement/input complement flag ╳ ○ ○ ○ Off Off - R/W NO Off M1097 Matrix rotation/displacement direction flag ╳ ○ ○ ○ Off Off - R/W NO Off M1098 Matrix counting the number of bits which are “1” or “0” ╳ ○ ○ ○ Off Off - R/W NO Off M1099 On when the matrix counting result is “0” ╳ ○ ○ ○ Off Off - R/W NO Off M1100 SPD instruction sampling once ╳ ╳ ○ ○ Off - - R/W NO Off M1101* Whether to enable file registers ╳ ○ ○ ○ - - - R/W Yes Off M1102* Y10 pulse output ends (For SC) ╳ ○ ╳ ╳ Off - - R/W NO Off M1103* Y11 pulse output ends (For SC) ╳ ○ ╳ ╳ Off - - R/W NO Off M1104* Status of SW1 on digital switch card/AX0 input point on 4DI card (photocoupler isolation) ╳ ╳ ○ ╳ Off Off - R NO Off M1105* Status of SW2 on digital switch card/AX1 input point on 4DI card (photocoupler isolation) ╳ ╳ ○ ╳ Off Off - R NO Off M1106* Status of SW3 on digital switch card/AX2 input point on 4DI card (photocoupler isolation) ╳ ╳ ○ ╳ Off Off - R NO Off M1107* Status of SW4 on digital switch card/AX3 input point on 4DI card (photocoupler isolation) ╳ ╳ ○ ╳ Off Off - R NO Off M1108* Status of SW5 on digital switch card ╳ ╳ ○ ╳ Off Off - R NO Off M1109* Status of SW6 on digital switch card ╳ ╳ ○ ╳ Off Off - R NO Off M1110* Status of SW7 on digital switch card ╳ ╳ ○ ╳ Off Off - R NO Off M1111* Status of SW8 on digital switch card ╳ ╳ ○ ╳ Off Off - R NO Off M1112* AY0 output point on 2DO card (transistor) ╳ ╳ ○ ╳ Off - Off R/W NO Off M1113* AY1 output point on 2DO card (transistor) ╳ ╳ ○ ╳ Off - Off R/W NO Off M1115* Switch for enabling pulse accelerating/decelerating output (not available in SC V1.4 and versions above) ○ ○ ╳ ╳ Off Off Off R/W NO Off M1116* _ Pulse output is accelerating (not available in SC V1.4 and versions above) ○ ○ ╳ ╳ Off Off Off R/W NO Off M1117* _ Accelerating/decelerating pulse output reaches its target (not available in SC V1.4 and _ versions above) ○ ○ ╳ ╳ Off Off Off R/W NO Off M1118* Pulse output is decelerating (not available in SC V1.4 and versions above) ○ ○ ╳ ╳ Off Off Off R/W NO Off M1119* _ Accelerating/decelerating pulse output is completed (not available in SC V1.4 and _ versions above) ○ ○ ╳ ╳ Off Off Off R/W NO Off Using the instruction DDRVI/DDRVA to enable two target frequencies.
╳ ╳ ○ ○ Off Off Off R/W NO Off M1120* Retaining the communication setting of COM2 (RS-485), modifying D1120 will be invalid when M1120 is set.
○ ○ ○ ○ Off Off - R/W NO Off M1121 Waiting for the sending of COM2 (RS-485) communication data ○ ○ ○ ○ Off On - R NO Off M1122 COM2 (RS-485) sending request ○ ○ ○ ○ Off Off - R/W NO Off M1123 Receiving through COM2 (RS-485) is completed ○ ○ ○ ○ Off Off - R/W NO Off M1124 Waiting for receiving through COM2 (RS-485) ○ ○ ○ ○ Off Off - R NO Off M1125 COM2 (RS-485) communication reset ○ ○ ○ ○ Off Off - R/W NO Off M1126 Selecting COM2 (RS-485) STX/ETX user defined or system defined ○ ○ ○ ○ Off Off - R/W NO Off M1127 Sending/receiving data of COM2 (RS-485) communication instruction is completed (RS instruction not included) ○ ○ ○ ○ Off Off - R/W NO Off M1128 Sending COM2 (RS-485)/receiving COM2 (RS-485) indication ○ ○ ○ ○ Off Off - R NO Off M1129 COM2 (RS-485) receiving time-out ○ ○ ○ ○ Off Off - R/W NO Off M1130 Selecting COM2 (RS-485) STX/ETX user defined or system defined ○ ○ ○ ○ Off Off - R/W NO Off