11 Appendix 11.8 Appendix H: Revision History DVP-PLC Application Manual 11-27 Item Revisions Chapter #1 Section 2.1: D5000~D9999 are added to SX V3.0 and above. Section 2.10: The descriptions of M1257, M1310, M1311, M1334, M1335, M1350, M1528, and M1529 are updated. Section 2.10: The descriptions of D1026, D1027, D1050~D1055, D1112, D1113, D1131, D1132, D1133, D1144, D1154, D1155, D1166, D1167, D1172~D1177, D1220, and D1480~D1991 are updated. Section 2.11: The program capacity of a DVP-SX series PLC in the description of D1002 is updated. The definitions of the pins in COM1 are added to the description of the functions of communication ports.
More information is added to the description of the reading/writing of data from/into the memory card/backup area. Mode information is added to the descriptions of spcial high-speed pulse output and adjustable accelerated/decelerated pulse output. The description of the interrupts used for reading the number of pulses is updated. The description of the enabling of DICF to execute the constant speed/final output section is added. Section 2.13: The description of the error codes C41F and C450 is added. The method of finding out the module which is disconnected or damaged in an EH system is added. Chapter 2 #2 The descriptions of API 67, API 154, API 198, and API 199 are updated.
Chapter 5 #3 The descriptions of API 22 and API 23 are updated. Chapter 6 #4 The descriptions of API 55, API 56, API 57, API 59, API 67, API 69, API 79, API 80, and API 83 are updated. Chapter 7 #5 The descriptions of API 101, API 112, API 114, API 148, and API 149 are updated. Chapter 8 #6 The descriptions of API 150, API 154, API 156, API 158, API 159, API 166, API 167, API 168, API 178, API 179, API 191, API 197, API 198, and API 199 are updated. Chapter 9 #7 Delete the instruction DSPA in chapter 5, 9 and appendix. Delete the item J from the section of the other newly added functions of DVP-EH3 in Appendix D. Chapter 5 Chapter 9 Appendix