2 Functions of Devices in DVP-PLC DVP-PLC Application Manual 2-70 ES SA Off STOP RUN EH2 EH3 Special D Function EX SX Attribute Latched Default SV SV2 SS SC On RUN STOP D1768* ↓ D1783* Data which is read from slave ID#10 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R YES 0 D1784* ↓ D1799* Data which is written into slave ID#10 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R/W YES 0 D1800* ↓ D1815* Data which is read from slave ID#11 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R YES 0 D1816* ↓ D1831* Data which is written into slave ID#11 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R/W YES 0 D1832* ↓ D1847* Data which is read from slave ID#12 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R YES 0 D1848* ↓ D1863* Data which is written into slave ID#12 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R/W YES 0 D1864* ↓ D1879* Data which is read from slave ID#13 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R YES 0 D1880* ↓ D1895* Data which is written into slave ID#13 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R/W YES 0 D1896* ↓ D1911* Data which is read from slave ID#14 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R YES 0 D1900 ↓ D1915 When M1356 is ON, the values in these registers are defined as the station address (ID1~ID16).
The default station address in D1399 is not used. Only when M1356 is ON is the latched function available. ╳ ╳ ╳ ○ 1~16 - - R/W NO 1~16 D1916 ↓ D1931 When M1356 is ON, the values in these registers are defined as the station address (ID17~ID32). The default station address in D1399 is not used. Only when M1356 is ON is the latched function available.
╳ ╳ ╳ ○ 17~32 - - R/W NO 17~32 D1912* ↓ D1927* Data which is written into slave ID#14 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R/W YES 0 D1928* ↓ D1943* Data which is read from slave ID#15 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R YES 0 D1944* ↓ D1959* Data which is written into slave ID#15 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R/W YES 0 D1960* ↓ D1975* Data which is read from slave ID#16 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R YES 0 D1976* ↓ D1991* Data which is written into slave ID#16 in the PLC LINK (They are non-latched data registers in SX V3.0 and above.) ╳ ○ ○ ○ - - - R/W YES 0 D1992 Code of the ninth right side extension module ╳ ╳ ╳ EH3 0 - - R NO 0 D1993 Code of the tenth right side extension module ╳ ╳ ╳ EH3 0 - - R NO 0 D1994 Code of the eleventh right side extension module ╳ ╳ ╳ EH3 0 - - R NO 0 DVP-PCC01 records the number of times the PLC code can be entered.
╳ ○ ○ ○ 0 - - R/W NO 0 D1995 Code of the twelfth right side extension module ╳ ╳ ╳ EH3 0 - - R NO 0 DVPPCC01 records the length of PLC ID. ╳ ○ ○ ○ 0 - - R/W NO 0 D1996 The 1st word of PLC ID in DVPPCC01 (indicated by the hex value corresponding to ASCII word) ╳ ○ ○ ○ 0 - - R/W NO 0