CANopen Communication Module DVPCOPM-SL (2) Select ”Setup” => ”Communication Setting” => ”System Channel”, and the "Serial Port Setting” dialog box will appear. (3) Set up the communication parameters in the PC and DVP-SV, e.g. the communication port, address, baud rate and communication format. Click on “OK” and return to the main page.
DVP-PLC Operation Manual 15 Item Function Default COM Port COM port on the PC to be used to communicate with DVP-SV COM1 Address Communication address of DVP-SV 1 Baud rate Communication speed between the PC and DVP-SV 9,600 (bps) Data Bits Communication protocol between the PC and DVP-SV 7 Parity Even Parity Stop Bit 1 Mode Communication mode between the PC and DVP-SV ASCII