CANopen Communication Module DVPCOPM-SL Click on “ OK ” and return to the main page. (4) Select “ Network ” => ” Online ” , and the “ Select Communication Channel ” dialog box will appear. In this example, if the connection with DVP-SV is in normal status, you will see the screen as below. DVP-SV and supposed there are two connected in this example, after clicking on “ Online ” , you will If there are more than one DVPCOPM-SL modules (less than 8) connected to the left side of see the screen as below. The DVPCOPM-SL which is closest to DVP-SV is regarded the first module, and so on. (5) Select the DVPCOPM-SL which needs to establish the communication.
Click on “ OK ” and start to scan all the slaves on the network. If the network installation and power supply are normal, you will see the screen as below. DVP-PLC Application Manual 12 Item Function Default with DVP-SV Address Communication address of DVP-SV 1 Baud rate Communication speed between the PC and DVP-SV 9,600 (bps) Data Bits COmmuniction protocol between the PC and DVP-SV 7 Parity Even Parity Stop Bit 1 Mode Communication mode between the PC and DVP-SV ASCII