DeviceNet Network Scanner DVPDNET-SL 3 Installation 3.1 Connecting DVPDNET-SL to DVP-SV MPU „ Adjust the extension clip on the left side of DVP-SV. „ Meet the extension port of the MPU with DVPDNET-SL as shown in the figure below. „ Fasten the extension clip. DVPDNET DVP28SV RUN STOP 3.2 Installing DVPDNET-SL and DVP-SV MPU on DIN Rail „ Use 35mm DIN rail. „ Open the DIN rail clip on DVP-SV and DVPDNET-SL. Insert DVP-SV and DVPDNET-SL onto the DIN „ Clip up the DIN rail clips on DVP-SV and DVPDNET-SL to fix DVP-SV and DVPDNET-SL on the DIN rail, rail. as shown below. 35mm DIN rail DVP-PLC Operation Manual 6 DVPDNET DVP28SV RUN STOP