Chapter 3 Featured Functions 3.3.1.1 STP Configuration Global Settings Description 3-45 Description Factory Default Spanning Tree Status Specify the status of STP on the switch: Disable: STP is disabled. The settings do not take effect after you have applied them, but you still can configure STP. Enable: STP is enabled. The settings take effect after you have applied them. Enable Force Protocol Version Specify the version of STP: STP: Spanning Tree Protocol. RSTP: Rapid Spanning Tree Protocol. MSTP: Multiple Spanning Tree Protocol. MSTP Configuration Name Enter the STP identifier for the switch.
You can configure alphanumeric characters and special characters, and the maximum length is 32. MAC address of the switch Configuration Revision Level Enter an identifier that specifies the current configuration. The number must be in the range of 0 to 65535. 0 Forward BPDU while STP Disabled Specify whether spanning tree bridge protocol data units (BPDUs) are forwarded: Disable: When STP is disabled, Spanning tree BPDUs are not forwarded. Enable: When STP is disabled, Spanning tree BPDUs are forwarded. Disable Configuration Digest Key This field displays a calculated value from the MSTP configuration. The switches are qualified by the key and function in the same region.
Fixed Configuration Format Selector This field displays the configuration identifier format selector that is used. 0