６ - ９ Settings Selection Display This screen allows you to store various setting information for the selected sensor amplifier to the PLC memory. It is also used to write information to the sensor amplifier. (1) (3) (2) (4) Additional Information The button framed in green indicates a memory area in which information is stored. Select a memory area to perform the operation by pressing a toggle button. * You cannot select multiple buttons simultaneously. First release the button currently being selected, and then select another button. With the select workpiece, the following information can be stored to the memory or written to the amplifiers.
・ Threshold 1 Input 1, Input 2 ・ Threshold 2 Input 1 ・ Operation mode ・ Detection function ・ Timer function ・ Timer time 1 ・ Timer time 2 ・ Zero reset ・ Hold mode function ・ Percent tuning setting ・ Percent tuning level ・ DPC function ・ Power tuning setting ・ Power tuning level ・ Output mode ・ Hysteresis width setting ・ Hysteresis width 1 ・ Hysteresis width 2 On the top of the screen, the status of the selected sensor amplifier is displayed. You cannot change the set value there. 38