Kendrion Kuhnke Automation GmbH CAM Creator 7.1.2 Diagram view Displays the cams of the enabled tracks as a CAM array. Assuming "Cross-Hair" is enabled under Project, Settings, System, pressing and holding the left mouse button and moving the mouse over the cams will display the coordinates of each cam. The CAM array's Refresh button only serves to refresh the display. Kuhnke FIO CAM Control ( E 808 GB ) 30 11/10/2017 • OK acknowledges the prompt. • Open the Excel worksheet and display the sheet containing the cam table. • In FIOCAM Creator, again click on import from Excel The table will now be imported into the open project. The data quantities will consider the project settings.