Kendrion Kuhnke Automation GmbH Reliability, Safety 2.5 Hazard and other Warnings Despite the actions described in section 2.1.4, the occurrence of faults or errors in electronic control units - even if most highly improbable - must be taken into consideration. Please pay particular attention to the additional notices which we have marked by symbols throughout this instruction manual. While some of these notices make you aware of possible dangers, others are intended as a means of orientation. They are described further down below in descending order of importance. Every alert and hazard warning is made up as follows:
Type and source of risk Potential consequences of non-observance Preventive measures Other Notices Kuhnke FIO CAM Control ( E 808 GB ) 7 11/10/2017 DANGER A DANGER warning makes you aware of an immediately hazardous situation which WILL cause a serious or fatal accident if not observed. WARNING A WARNING makes you aware of a potentially hazardous situation which MAY cause a serious or fatal accident or damage to this or other devices if not observed. CAUTION A CAUTION alert makes you aware of a potentially hazardous situation which MAY cause an accident or damage to this or other devices if not observed.
NOTE A NOTE makes you aware of a potentially hazardous situation which MAY cause damage to this or other devices if not observed. Information This symbol draws your attention to additional information concerning the use of the described product. This may include cross references to information found elsewhere (e.g. in other manuals).