EA180 Series Servo Drive Users Manual Safety Precautions Safety definitions: In this Manual, safety precautions include the following two types: Please read this chapter carefully when installing, debugging and repairing this system, and be sure to operate according to the safety precautions required herein. We bear no liability for any injury and loss caused by illegal operation. Safety Precautions Before installation: Danger 1. If it is found that the package is flooded, any parts are missing or damaged after unpacking, please do not install the device! 2. If the mark on the outer package does not match the name of the physical product, please do not install the device! Attention 1.
Please handle the device gently, otherwise it may be damaged! 2. Do not use damaged servo drives or servo drives with missing parts, otherwise there is a risk of injury! 3. Do not touch any component of the control system with your hands, otherwise electrostatic damage may be caused! During installation: Danger 1. Please install the device on metal or other flame retardant objects and keep it away from combustible materials, otherwise a fire may be caused! Attention 1. Please prevent any lead end or screw from falling into the servo drive, otherwise the device will be damaged! 2. Please install the servo drive in a place with less vibration and no direct sunlight. 3.
When the servo drive is placed in a relatively closed cabinet or space, please reserve the installation gap to ensure the cooling effect. When wiring: Danger 1. The instructions in this Manual must be followed and used by professional electrical engineers, otherwise unexpected risks will occur! 2. There must be a circuit breaker between the servo drive and the power supply, otherwise a fire may occur! 3. Please make sure the power supply is in zero energy state before wiring, otherwise electric shock may be caused! The servo drive must be grounded correctly according to the standard, otherwise electric shock may be caused! 4.
The grounding terminal must be grounded reliably, otherwise electric shock or a fire may be caused. 2 Danger: Danger caused by failure to operate as required, which may lead to serious injuries and even death; Attention: Danger caused by failure to operate as required, which may lead to moderate or minor injuries and equipment damage;