4.2 General description of driver operation modes The EA190 servo driver has 7 operation modes: Modes can be switched as follows: 39 Technical Manual for EA190 Series Servo Driver V100 When the lower right dot “.” on LED4 flashes and the lower right dot “.” on LED3 is solidly on, it means the current screen is the second page of the current message; the first and second pages can be switched for display by using the key, and the current data is negative; In case of digital display, the lower right dot “.” on the LED3, LED2 and LED1 represents the decimal point.
When the lower right dot “.” on LED0 flashes, it means an alarm or warning is present Operation mode Function Example of menu display at all levels Item Identification Level 1 Level 2 Level 3 Initialization mode Display driver model - Status monitoring mode Display the current driver status - Parameter monitoring mode Select a monitoring parameter and monitor its value - Parameter setting mode Select a parameter to be changed, and change its value Auxiliary function mode Select an auxiliary function, and perform corresponding operation Modified parameter mode (hidden in default) All parameters inconsistent with factory settings can be viewed (Inconsistent parameters can be displayed for viewing through the auxiliary function AF-08 = 1; when the machine is powered on again, they are still hidden) - Warning and alarm mode (displayed in case of an abnormality) Display warning and alarm message -