Technical Manual for EA350 Analog Pulse Type Servo Driver V101 12.5.4 Parameter table of SES series servo motor: Note: 1: Value in () is the value in case a brake is provided; 2: When an oil seal is provided, it shall be derated by 10% for use 3: Rated torque refers to the continuous permitted torque upon installation on an aluminum heat sink of the following dimension and at the ambient temperature 40℃. Motors with flanges 40, 60 and 80: 250*250*6mm Motors with flanges 90 and 110: 300*300*10mm Motor with flange 130: 400*400*15mm Motor with flange 180:
550*550*20mm 259 Servo motor model Rated Maximum Voltage Rated Rated Maximum Maximum Torque Rotating Adaptable rotating rotating Rated class power current instantaneous instantaneous constant inertia, driver speed, speed, torque Nm (V) (W) A current, A torque, Nm Nm/A Kg.cm2*10-4 EA350- rpm rpm SES04-005-30-2□AY□ AC 220 50 3000 6000 0.6 1.8 0.16 0.48 0.26 0.02(0.02) 0R9-1□ SES04-0R1-30-2□AY□ 100 3000 6000 1.1 3.3 0.32 0.96 0.29 0.04(0.04) 1R6-1□ SES06-0R2-30-2□BY□ 200 3000 6000 1.6 4.8 0.64 1.92 0.44 0.29(0.34) 1R6-1□ SES06-0R4-30-2□BY□ 400 3000 6000 2.3 6.9 1.27 3.81 0.59 0.56(0.61) 2R5-1□ SES08-0R7-30-2□BY□ 750 3000 5000 4.0 12 2.4 7.2 0.653 1.56(1.66) 4R8-2□ SES08-1R0-30-2□BY□ 1000 3000 5000 6.0 18 3.2 9.6 0.538 2.03(2.13) 6R2-2□ SES13-0R8-15-2FBY□ 850 1500 3000 6.9 17 5.39 13.8 1.72 13.95(16.1) 011-2B SES13-0R8-15-3FBY□ AC 380 850 1500 3000 3.5 8.5 5.39 13.8 1.72 13.95(16.1) 5R6-3B SES13-1R3-15-3FBY□ 1300 1500 3000 5.4 14 8.34 23.3 1.78 19.95(22.1) 5R6-3B SES13-1R8-15-3FBY□ 1800 8.4 20 11.5 28.7 1.5 26.1(28.1) 8R5-3B SES18-2R9-15-3FBY□ 2900 11.9 28 18.6 45.1 1.7 46.0 (53.9) 013-3B SES18-4R4-15-3FBY□ 4400 16.5 40.5 28.4 71.1 1.93 67.5 (75.4) 017-3B SES18-5R5-15-3FBY□ 5500 20.8 52 35 87.6 1.8 89.0(96.9) 022-3B SES18-7R5-15-3FBY□ 7500 25.7 65 48 119 1.92 125.0(133) 028-3B SES18-3R6-20-3FBY□ 3600 2000 2500 9.5 28.5 16.7 50.16 2.1 46.0(53.9) 013-3B