Technical Manual for EA350 Analog Pulse Type Servo Driver V101 4.2 General description of driver operation modes The EA350 servo driver has 7 operation modes: Modes can be switched as follows: 4.3 Initialization mode When the driver control panel (L1C and L2C) is initially powered on or reset by using software AF-00, the system will enter the initialization mode and display ; 1s later, it will automatically enter the status monitoring mode. 4.4 Status monitoring mode The system will automatically enter the status monitoring mode 1s after normal initialization:
47 Operation mode Function Example of menu display at all levels Item Identification Level 1 Level 2 Level 3 Initialization mode Display driver model - - Status monitoring mode Display the current driver status - - Parameter monitoring mode Select a monitoring parameter and monitor its value - Parameter setting mode Select a parameter to be changed, and change its value Auxiliary function mode Select an auxiliary function, and perform corresponding operation Modified parameter mode (hidden by default) Inconsistent parameters can be displayed for viewing (through the auxiliary function AF- 08=1; when the machine is powered on again, they are still hidden) - Warning and alarm mode (displayed on abnormality) Display warning and alarm message - -