Technical Manual for EA350 Analog Pulse Type Servo Driver V101 * This parameter will be saved and immediately activated (ON) when the system is powered on next time. If this is not desired, please set the parameter value to 0 before power-off. 81 * The jog running speed is determined by P8-00, and the acceleration and deceleration time is determined by P8-01. * Jog running occurs in the (inactivated and ready) state; if a warning occurs during jog running, the system will automatically exit from the mode.
Internal S ON command _ Data size 16bit Communication address 3F03H Register value storage Save Register value Keyboard display Operation 0 Press to display ; if there is no other activation input, the driver will enter the OFF state 1 If the activation conditions are satisfied, press to display and the driver will enter the ON state.