GTC – SOFTWARE DEVELOPMENT GROUP 1.4. SOFTWARE INITIALIZATION 1.4.1. License Activation After that you have successfully installed the program and the USB drivers you can log off as Administrator and log on as a normal user. At any rate, the first thing that you are required to do the first time you run SidekickPC is to activate the software license. Please remember that, in order to activate the software license, your PC must be connected to the internet. The first time you run the software, you can see this message: Fig. 4. License Activation Request After that you press the OK button, you should execute a few initial configuration steps for your software:
Language (optional) Internet Settings (mandatory if you are going to use non-standard settings) License Activation (mandatory) You may want to choose a display language other than English. In this case you must use the dialog box that you can see if you select the Language command in the Options menu. If you are going to use non-standard internet proxy, you must select proper Internet Settings. You can see the corresponding dialog if you select the Internet Settings command in the Commands menu. For detailed information on this matter, please refer to the corresponding section later in this chapter. © 2012 Electrolux Italia S.p.A., All rights reserved 12 File:
SidekickPC Manual (EN).pdf - Date: 20/04/2012