GTC – SOFTWARE DEVELOPMENT GROUP 2.4. DISCONNECTING THE SPARE BOARD FROM THE PC CAUTION! In order to avoid the risk of electrical shock only skilled personnel should use and install the Appliance Connection Kit. You should NEVER power on the spare board from the mains supply (230VAC) when it is not installed in the appliance. The adapter interface module provides the necessary power to the board during the configuration procedure, without the need of connecting the mains supply. Before handling the electronic board, you should discharge your body from possible electrostatic charges, by touching one conductive object connected to earth.
In addition, you should never touch both neither the board nor the adapter module interface connector during configuration program download and, in general, when the board supply is present. These precautions reduce the risk of damaging the electronic board because of electrostatic discharges. You should do the following steps to disconnect the PC from the spare board: Disconnect the USB cable from the PC. Important: wait at least 5 seconds BEFORE touching the board or the interface cable to prevent Electro Static Discharge (ESD) damage risk. Disconnect the adapter module interface cable from the board. © 2012 Electrolux Italia S.p.A., All rights reserved 32 File:
SidekickPC Manual (EN).pdf - Date: 20/04/2012