9.5.3 Thermostat/NTC sensor a. Remove the rear cabinet shell. b. Detach the drive belt from the pulleys (if necessary). c. Detach the wiring connectors (fixed-temperature thermostats and NTC sensors) d. Remove the thermostat/sensor from the sealing ring (41). Refer to section 9.2.7 for removal of the adjustable thermostat (42). Re-assembling the NTC sensors (version with "long" bulb): The sensor must be replaced with the groove in the connector base facing downwards (43). 9.5.4 Heating element a. Remove the rear cabinet shell. b. Detach the drive belt from the pulleys. c. Detach the wiring connectors (42). d. Remove the screw which secures the heating element flange. e.
Push the nut on the heating element flange towards the interior of the tub (44). f. Remove the heating element (45). SOI/DT 2002-05 eb 103 599 35 23-17