8.10.2 Reversal of direction of rotation during washing The windings are designed to provide rotation in both directions, depending on the way in which the capacitor is connected. Each functions alternately as a primary winding and start-up winding. When reverse rotation is required, the switching contact of the timer reverses the connection of the capacitor between the two windings, thus reversing the direction of rotation.
Motor stopped Clockwise rotation Counter-clockwise rotation 8.10.3 Electrical symbols Motor Capacitor 8.10.4 Circuit diagrams Motor with traditional connection Motor with suppressor connection A - B Low-speed windings C - Common low-speed winding D - High-speed running windings E - High-speed running winding P - Overload cut-out SOI/DT 2002-05 eb 76 599 35 23-17