9.2 Control panel (standard version) 8 9.2.1 a. Remove the work-top b. Extract the detergent drawer (8) c. Remove the screws that secure the control panel to the control panel support (9) d. For models with knobs external to the control panel: release the knob cover by pressing the hole gently with a small screwdriver and turning the knob cover counter-clockwise (10) e. Remove the screws which secure the control panel to the cross- member and release the anchor tabs from the support (12) f. Release the control panel from the lower right-hand guide and remove. To facilitate its release, unscrew the screw which secures it to the cabinet and lift the control panel support slightly (13 or 14).
g. Remove the pilot lamp from its housing in the control panel and (for electronic models) disconnect the wiring connectors from the PCB. When re-assembling : Ensure that the knobs/flanges are positioned correctly! 12 13 9.2.2 Control panel – versions for “square” cabinets a. Remove the work-top b. Extract the detergent drawer (8) c. Remove the screws which secure the control panel to the control panel support (9) d. For models on which the knobs are external to the control panel: release the knob cover by pressing the hole gently with a small screwdriver and turning the knob cover counter-clockwise (10-11) e.
Remove the front-mounted screws which secure the control panel support to the cabinet (13 or 14) and, if present, those that secure the control panel (12). f. If present, remove the internal screw that secures the control panel to the support. g. Release the tabs which anchor the control panel to the support (15- 16) and remove the control panel. To facilitate this operation, lift the support to release the lower anchor tabs on the control panel (17). h. Remove the pilot lamp from its housing in the control panel and (for electronic models) disconnect the wiring connectors from the PCB. When re-assembling : Ensure that the knobs/flanges are positioned correctly!
14 15 16 17 SOI/DT 2002-05 eb 98 599 35 23-17 9 10 ons for “soft” cabinet er (8)