Shaker Solenoid OSR The magnetic system of the vibrating solenoid is cast in a plastic hou- sing. It consists of two excitation windings and the two halves of the ma- gnetic body which are connected at the bottom by a permanent magnet. The magnetic circle is closed via the air gap by the body to be vibrated which represents the armature. Fields of Application Shaking e.g. vibration of injection needles The system is biased by the permanent magnet integrated into the ma- gnetic body, generating a constant pulling force between magnetic body and armature.
When an AC-voltage is applied to the excitation winding the force effect of the electromagnetic alternating field is superimposed on the force effect of the permanent magnet. Compacting e.g. of granulate Bunker and Container Vibration to avoid bridges and gaps In order to achieve the vibrating movement desired the useful load (the body to be vibrated) must be mounted to a base plate or a base in a man- ner capable of vibrating by means of vibrating metals, pressure springs or leaf springs.
Accessories Advantages •• Permanentmagnetic adhesive attachment OSR127.500001.600 •• Sturdy and compact design •• Angle mounting OSR127.500131.600 •• High insensitivity to moisture and dust •• Phase Angle Control 33 43303B00 / 33 43304B00 •• Easy mounting by magnetic adhesive attachment Mounting Options 15 Variant Designation A Lateral screw mounting B Permanent magnetic adhesive attachment C Angle mounting