EM500 Open-Loop Vector Control Inverter User Manual 118 Stop status display parameter 3） F12.37 Mode 1 display parameter 5（LED Stop status display parameter 4） 0.00～99.99 18.09 ● F12.38 LCD display parameter 1 0.00～99.99 18.00 ● F12.39 LCD display parameter 2 0.00～99.99 18.06 ● F12.40 LCD display parameter 3 0.00～99.99 18.09 ● F12.41 UP/DOWN cross zero option 0：forbidden 1：allowed 0 〇 F12.42 Digital potentiometer frequency reference 0.00～F00.16 Hz 0.00 × F12.43 Digital potentiometer torque reference 0.00～| F13.02| % 0.0 × F13 Torque Control Parameter Group F13.00 Speed/Torque Control 0: Speed Control 1: Torque Control 0 〇 F13.01 Torque Setting 0: Numeric Torque Setting F13.02 1: AI1 2:
AI2 3: AI3 4: AI4 (Expansion Card) 5: High-Frequency Pulse Input (X7) 6: Communication Percentage Setting (Full ranges of options 1 to 6, correspond to numeric torque setting F13.02) 7: Not Used 8: digital potentiometer 0 〇 F13.02 Numeric Torque Setting -200.0 - 200.0 (100.0= Motor Rated Torque) % 100.0 ● F13.03 Preset Torque 1 -200.0 - 200.0 % 0.0 ● F13.04 Preset Torque 2 -200.0 - 200.0 % 0.0 ● F13.05 Preset Torque 3 -200.0 - 200.0 % 0.0 ●