EM500 Open-Loop Vector Control Inverter User Manual 137 E57: Pipe networks Overpressure E58: Pipe networks Undervoltage E59: water supply tank Water shortage E60: Not Used E61: CANSinee Communication Timeout F19.01 Output Frequency at Fault 0.00 - Upper Limit Frequency Hz 0.00 × F19.02 Output Current at Fault 0.00 - 650.00 (Motor Rated Power ≤ 75kW) 0.0 - 6500.0 (Motor Rated Power >75kW) A 0.00 × F19.03 Bus Voltage at Fault 0 - 1200 V 0 × F19.04 Running Mode at Fault 0: Not Running 1: Forward Acceleration 2: Reverse Acceleration 3: Forward Deceleration 4: Reverse Deceleration 5: Forward Constant Speed 6:
Reverse Constant Speed 0 × F19.05 Working Time at Fault h 0 × F19.06 Last Fault Type See F19.00 Parameter Description 0 × F19.07 Output Frequency at Fault Hz 0.00 × F19.08 Output Current at Fault A 0.00 × F19.09 Bus Voltage at Fault V 0 × F19.10 Running Mode at Fault See F19.00 Parameter Description 0 × F19.11 Working Time at Fault h 0 × F19.12 Types of Last Two Faults See F19.04 Parameter Description 0 × F19.13 Output Frequency at Fault Hz 0.00 × F19.14 Output Current at Fault A 0.00 × F19.15 Bus Voltage at Fault V 0 ×