EM600 High-Performance Vector Control Inverter User Manual ★ : The difference between inverter and motor shall not be more than two power ratings. Please try to select a motor that matches with the inverter in rated current. EM600 technical specifications are shown in Table 1–2. Table 1–2 EM600 Technical Specifications 10 Items Specifications 3-phase 380 V-20% - 415 V+20%, 50-60 Hz±5%. 3-phase 660 Input Input Voltage Range V-15% -690 V+10%, 50-60 Hz±5%. voltage imbalance rate Maximum Output Maximum output voltage is identical to input voltage.
Voltage Output Rated Output Current 100% non-stop rated current output Maximum Overload 150% rated current for 60s, 180% rated current for 10s and Current 200% rated current for 2s V/F Control (VVF); Control Mode Sensorless Vector Control (SVC) Feedback Vector Control (FVC) Input Mode Frequency (speed) input and torque input Keypad, control terminals (2-wire sequence and 3-wire Start/Stop Control Mode sequence) and communication Frequency Control Range 0.00 - 600.00 Hz Input Frequency Numeric input: 0.01 Hz, analog input:
0.1% of maximum Resolution frequency Governor Deflection 1:50 (VVF), 1:200 (SVC) and 1:1000 (FVC) Speed Control Accuracy ±0.2% rated synchronous speed Acceleration/Deceleration 0.01 - 600.00 seconds/0.1 - 6000.0 seconds/1 - 60000 seconds Basic Time Control Rated output voltage: 20% - 100% adjustable; frequency base:
V/F Features Functions 20 Hz - 600 Hz adjustable Torque Boost Fixed torque boost curve, user defined V/F curve scaling Start Torque 150%/1 Hz (VVF), 150%/0.25 Hz (SVC) and 150%/0 Hz (FVC) Torque Control Accuracy ±8% rated torque (SVC), ±5% rated torque (FVC) Input voltage changes, but output voltage remains unchanged AVR basically Automatically limit output current to avoid frequently Automatic Current Limit overcurrent trip Brake frequency: 0.01 - Maximum frequency, brake time: 0 – 30 DC Brake S Brake current: 0% - 100% rated current Communication, preset speed, analog quantity, high-speed Signal Input Source pulse, etc.
Function Reference Power Supply 10 V/20 mA of Input Terminal Control Power 24 V/200 mA and Supply Output Numeric Input Terminal 7 (standard X1 – X7) + 4 (expansion card X8 - X11) numeric