EM600 High-Performance Vector Control Inverter User Manual Safety Information In this manual, there are two types of safety information. Danger: The label indicates that a failure to follow instructions may result in serious injury or even death. Caution: The label indicates that a failure to follow instructions may result in moderate or slight injury and device damage. Please read this chapter carefully before system installation, debugging and maintenance and always follow safety precautions below during operation. SINEE will not undertake any damage or loss caused by a failure to follow the instructions. Safety Precautions Before Installation: Danger 1.
Do not install inverter if its package is wetted or any component is missing or broken. 2. Do not install inverter if the label information on its package is not identical to that on the inverter. Danger 1. Be careful when carrying or transporting inverter so as to avoid damage! 2. Do not use inverter if it is damaged or any component is missing so as to avoid injury! 3. Do not touch the parts of control system with bare hands so as to avoid ESD! During Installation: Caution 1. Ensure that no cable strips or screws are dropped into inverter so as to avoid damage to the inverter. 2. Install inverter at a place with less vibration and no direct sunlight. 3.
Consider installation space for cooling purpose when inverter is installed in a closed cabinet or space. 2 Danger 1. Installation base shall be metal or other non-flammable material so as to prevent fire risk. 2. Do not unscrew fixing bolts, especially bolts with red mark.