EM600 High-Performance Vector Control Inverter User Manual Step 3: Step 4: Figure 2-3 Disassemble Keypad Assemble keypad: Make RJ-45 terminal aligned with the modular plug at keypad bottom horizontally, and press keypad flatly until it clicks into the right place. See Figure 2–4. Figure 2-4 Keypad Installation 2.6 Flush Mounting EM600 inverter (5.5 kW – 200 kW) can be changed to flush mounting type. Installation of EM600 inverter (22 kW or above): remove top and bottom mounting holes of original housing (Figure 2–5) to the position shown in Figure 2–6, and install removed bolts back to the said mounting holes again.
Figure 2-5 Disassemble Top and Bottom Mounting Holes 拆下正面及两侧的安装螺栓 Remove Installation Bolts at Front Face and Both Sides 23