EM630/TC6A Closed-Loop Vector Hoist Inverter User Manual Safety Information In this manual, there are two types of safety information. Danger: The label indicates that a failure to follow instructions may result in serious injury or even death. Caution: The label indicates that a failure to follow instructions may result in moderate or slight injury and device damage. Please read this chapter carefully before system installation, debugging and maintenance and always follow the safety precautions below during operation. SINEE will not undertake any damage or loss caused by a failure to follow the instructions. Safety Precautions Before Installation: 1.
Do not install inverter if the package is wetted or any component is missing or broken. 2. Do not install inverter if the label on the package is not identical to that on the inverter. Danger Danger 1. Be careful when carrying or transporting the inverter so as to avoid damage! 2. Do not use inverter if it is damaged or any component is missing so as to avoid injury! 3. Do not touch parts of control system with bare hands so as to avoid ESD! During Installation: Danger 1. The installation base shall be metal or other non-flammable material so as to prevent fire risk. 2. Do not unscrew the fixing bolts, especially the bolts with red mark. Caution 1.
Ensure that no cable strips or screws are dropped into the inverter so as to avoid damage to the inverter. 2. Install inverter at a place with less vibration and no direct sunlight. 3. Consider the installation space for cooling purpose when inverter is installed in a closed cabinet or space. Wiring: 2