User Guide of EM730 Series Inverter ( and below means that the potentiometer rotates clockwise and counterclockwise.) 4.2 Operation Mode of Keyboard with Digital Tube Display selection level (Level 1), function code selection level (Level 2) and parameter level (Level 3) The LED keyboard menu is divided into the monitoring level (Level 0), menu mode from low to high. The menu levels mentioned below are represent by numbers. There are five parameter display modes:
menu mode ( -- A -- ), used to display all function codes; user-defined mode ( -- U -- ), used to display only function codes selected by the user based on the F11 group; non-default mode ( -- C -- ), used to display only the function codes that differ from the default settings; Protection information display mode ( -- E -- ): display the current protection information; version information mode ( -- P -- ): display software and product serial numbers. by default. Press the ESC key When the keyboard is powered on, the first monitoring parameter of Level 0 is displayed to open the Level 1 menu. Users can turn the potentiometer indicator in the keyboard to select different menu modes.
The process of menu mode selection is shown in Fig. 4-2. 32 enable the function code following the current function code. Unit indicator It is ON when the frequency, current, and voltage are displayed. Running direction indicator This indicator is ON during reverse running. It is OFF during forward running. It is ON when a certain frequency is being monitored or displayed. (Green) Running indicator It is ON when the inverter is running, flickering when the inverter is being stopped, and OFF after the inverter is stopped. (Red) Protection indicator When the inverter is in the protection status, this indicator will be ON in red.