User Manual of EM730/EM730E Series Inverter When the simple PLC is running, the operating frequency, operating direction, acceleration/deceleration time and operating time in the entire segment can be set separately. This is described below with the 13 th segment (the last segment) as an example. The specific operation is shown in Fig. 7-. F08.12=50.00 : the operating frequency of 13 th segment is 50.00Hz. F08.43=31 : the operating direction in the 13 th segment is reverse, and the acceleration and deceleration are controlled based on the acceleration and deceleration time 4 (F15.07/F15.08). F08.44=5.0 : the operating time in the 13 th segment is 5.0s (F08.18=0 by default).
7.10 PID Function Parameter Group of F09 Group The EM730/EM730E series inverter has a process PID function, as described in this section. Process PID control is mainly for pressure control, flow control and temperature control. Kp Ts KpKi Out + + Ref + + KpKdTs d Fdb dt Fig. 7-27 Block Diagram of Process PID 217 0: forward 1: reverse Tens place: Acceleration and deceleration time options 0: acceleration and deceleration time 1 1: acceleration and deceleration time 2 2: acceleration and deceleration time 3 3: acceleration and deceleration time 4 F08.48 Running time of the fifteenth segment 0.0 - 6000.0 s/min 5.0 ●