User Manual of EM730/EM730E Series Inverter Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit Flicker bit In all menu modes, the user needs to press the ENTER key Fig. 4-3 Flowchart from Power-on to F03.28=5.28 Setting to save parameter modifications. Differences after parameter saving are as follows: In the full menu mode, enter the function code following the function code that has been successfully modified. In the user-defined mode, enter the user-defined function code (according to the sequence defined in F11.00-F11.31) following the function code that has been successfully modified.
In the non-default mode, enter the non-default function code following the non-default function code that has been successfully modified. In the protection information display mode, enter the protection information function code following the protection information function code that has been successfully modified. In the version information display mode, enter the serial number function code following the serial number function code has been successfully modified. 51