User’s Guide for EM760 series high-performance vector inverter Chapter 1 Overview 1.1 Model and Specification of EM 760 Series Inverter Rated voltage of power supply: Three-phase AC 340V~460V Applicable motor: Three-phase AC asynchronous motor and permanent magnet synchronous motor.
Table 1–1 Technical Specifications of EM760 Series Inverter 8 Rated voltage of Applicable motor power Model Rated output current (A) power supply (kW) Three-phase AC 340~460V EM760-0R7G/1R5P-3B 0.75/1.5 2.5/4.2 EM760-1R5G/2R2P-3B 1.5/2.2 4.2/5.6 EM760-2R2G/3R0P-3B 2.2/3.0 5.6/7.2 EM760-4R0G/5R5P-3B 4.0/5.5 9.4/12 EM760-5R5G/7R5P-3B 5.5/7.5 13/17 EM760-7R5G/9R0P-3B 7.5/9.0 17/20 EM760-011G/015P-3B 11/15 25/32 EM760-015G/018P-3B 15/18.5 32/38 EM760-018G/022P-3B 18.5/22 38/44 EM760-022G/030P-3B 22/30 45/59 EM760-030G/037P-3/3B 30/37 60/73 EM760-037G/045P-3/3B 37/45 75/87 EM760-045G/055P-3/3B 45/55 90/106 EM760-055G/075P-3/3B 55/75 110/145 EM760-075G/090P-3/3B 75/90 150/169 EM760-090G/110P-3 90/110 176/208 EM760-110G/132P-3 110/132 210/248 EM760-132G/160P-3 132/160 253/298 EM760-160G/185P-3 160/185 304/350 EM760-200G/220P-3 200/220 380/410 EM760-220G/250P-3 220/250 426/456 EM760-250G/280P-3 250/280 465/510 EM760-280G/315P-3 280/315 520/573 EM760-315G/355P-3 315/355 585/640 EM760-355G/400P-3 355/400 650/715 EM760-400G/450P-3 400/450 725/810 EM760C-450G/500P-3 450/500 820/900 EM760C-500G/560P-3 500/560 900/1010 EM760C-560G/630P-3 560/630 1010/1140 Item Specification Power Rated voltage of Three-phase 340V-10% to 460V+10% supply power supply 50-60Hz ± 5%; voltage unbalance rate:
Output Maximum output The maximum output voltage is the same as the input power voltage. voltage Rated output current Continuous output of 100% rated current Maximum overload current G model: 150% rated current for 60s s P model: 120% rated current for 60s (2kHz carrier; please derate for carrier above this level) Basic control functions Driving mode V/F control (VVF); Speed sensorless vector control (SVC) Speed sensor vector control (FVC) Input mode Frequency (speed) input, torque input Start and stop Keyboard, control terminal (two-line control and three-line control ),