Epson Network Guide 4. Check if the following necessary components are in the list. The following table lists the components required for configuring the network interface with EpsonNet Config. The following table lists the components required for network printing. 5. Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties dialog box to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP address, the subnet mask, etc. and then click OK . 6. Restart the computer. The necessary components are now installed. Go to the section “Setting Up the Network Interface” on page 18.
How To 16 EpsonNet Config’s setting screens Necessary components TCP/IP, WSD, IPP/IPPS, UPnP, Bonjour, MS Network Internet Protocol (TCP/IP) Printing method Necessary components TCP/IP printing Internet Protocol (TCP/IP)