DS-40 User’s Guide Getting to Know Your Product Note: Remove the batteries from the product if you are going to use the product in USB mode for an extended period of time. Indicator status when connecting using a wireless network 14 Light Indicator Status Meaning Ready (Blue) and Wi-Fi (Blue) Flashing (alternately) The firmware is being updated. Flashing (simultaneously) A paper jam has occurred. Set the document again. & “Problems Indicated by Status Light” on page 44 If the lights continue to flash, a fatal error may have occurred. Contact your local dealer. Ready (Blue), Wi-Fi (Blue), and Low battery (Amber) Off The product is off.
Light Indicator Status Meaning Ready (Blue) Flashing ❏ The product is initializing. ❏ The product is being calibrated or cleaned. Ready (Blue) and Wi-Fi (Blue) On The product is ready to scan or the product is in direct Wi-Fi connection mode. Ready is flashing and Wi-Fi is on The product is scanning or connecting to a wireless network. Ready is on and Wi-Fi is flashing. A Wi-Fi protected setup (WPS) error or an AOSS error has occurred. See the Troubleshooting section in the Network Guide for details on wireless connection problems. Flashing (alternately) The product is in standby state for Wi-Fi connection or the firmware is being updated.
Flashing (simultaneously) A paper jam error has occurred. & “Problems Indicated by Status Light” on page 44 If the lights continue to flash, a fatal error may have occurred. Contact your local dealer. Wi-Fi (Blue) Flashing An AOSS security error has occurred. See the Troubleshooting section in the Network Guide for details on wireless connection problems. Low battery (Amber) On The batteries are running low. Prepare new batteries. Ready (Blue) , Wi-Fi (Blue), and Low battery (Amber) Off The product is off.