Installation Position and Environment When using the Touch Unit, install the projector so that there is a gap between the projected image and the edges of the screen as shown in the following image. Aspect ratio 16:9 or 16:10 Installation Position When installing the projector, make sure there is a gap between the wall and the projector's air exhaust and intake vents as shown in the following image. Aspect ratio 16:6 (EB-1485Fi only) or 21:9 When you select the aspect above and move the [Screen Position] downwards, the shade of the touch unit may appear on the projected image.
Install the projector so that it is tilted at an angle of no more than +3 degrees or -3 degrees vertically and horizontally in relation to the screen. 17 5.7 - 50mm 100mm 100mm 20mm 5.7 - 50mm 100mm 100mm 20mm 20 100mm 20 - 50mm 100mm mm 20 100mm 20 - 50mm 100mm mm