EPSON — Interface

Interface *Position of interface on projector *1 Only analog RGB signals can be output from the BNC port and the Computer port. *2 Outputs audio from the HDMI/HDBaseT/DVI-D/Computer/BNC/LAN input source. *3 Audio output is not supported. Only compatible with EB-L1755U/EB-L1750U/EB-L1505UH/EB-L1500UH/EB-L1495U/ EB-L1490U. *4 For maintenance personnel only. Should not normally be used. *5 HDCP2.2 is only compatible with EB-L1755U/EB-L1750U/EB-L1505UH/EB-L1500UH/EB-L1495U/EB-L1490U. *6 Make sure you use LAN cables that are straight STP cables, category 5e or higher, and recommended by the HDBaseT Alliance. *7 100 Base-TX is supported. 12 No. Name No.

Name A BNC input port (5BNC) I RS-232C port (Mini D-Sub 9-pin) B Computer input port (Mini D-Sub15-pin) J Remote port (stereo mini) C Audio3 input port (stereo mini) K SDI input port (BNC)*3 D Audio1 input port (stereo mini) L Service port (USB Type-B)*4 E Monitor Out port (Mini D-Sub15-pin)*1 M HDMI input port (HDMI)*5 F Audio Out port (stereo mini)*2 N DVI-D input port (DVI-D 24-pin) G Audio2 input port (stereo mini) O HDBaseT port (RJ45)*5 *6 H Cable holder P LAN port (RJ45)*7