Installation Angle You can install the projector or mount it to the ceiling at any horizontal or vertical angle. Tilt adjustment You can extend and retract the foot to tilt the projector vertically or horizontally within approx. ± 2°. Installation Environment Warning Do not cover the projector's air intake or air exhaust vents. If the vents are covered, the internal temperature could rise and cause a fire. • Be sure to leave the following amount of space around the projector so as not to block the air exhaust and intake vents. Do not install the projector in an enclosed location such as a shelf or box, where air does not circulate.
• When setting up multiple projectors side-by-side, make sure there is a gap of at least 50 cm between the projectors. Also, make sure that the heat from the air exhaust vent does not go into the air intake vent. • Note the following points when projecting from projectors directly on top of another. Ȃ Ȃ Do not stack three or more projectors. Ȃ Ȃ Tilt the projector within the extendable range of the feet. Ȃ Ȃ Install the projector so that it does not fall over. Ȃ Ȃ When using the projector's feet, make sure that all of the feet are firmly placed on the projector below. 27