31 Function Category Function Command Name Network Supported EB-L20002U/EB-L20000U Setting Quick Corner (Coordinates movement) QCMV control direction movement ✔ ✔ Parameter control: Assign Quick Corner control position 01: Left-top 02: Right-top 03: Right-bottom 04: Left-bottom INIT (settings only) direction: Assign direction 01: Move to upper 02: Move to lower 03: Move to left 04: Move to right movement: Input the movement value Only "INC" command is available (Settings only) Setting/Acquiring geometry correction method CORRECTMET x1 ✔ ✔ CORRECTMET? ✔ ✔ Return code 00: Off 01: H/V-Keystone 02: Quick Corner 03: Point Correction 04: Arc Correction/Curved Surface 05:
Corner Wall Geometry correction Load Memory POPGC x1 ✔ ✔ Parameter 01: Memory1 02: Memory2 03: Memory3 Geometry correction Save Memory PUSHGC x1 ✔ ✔ Parameter 01: Memory1 02: Memory2 03: Memory3 Geometry correction Erase Memory ERASEGC x1 ✔ ✔ Parameter 00: ALL (Reset all Geometric Correction memories) 01: Memory1 02: Memory2 03: Memory3 Geometry correction Rename/Acquiring Memory name NAMEGC x1 x2 ✔ ✔ Parameter x1 Memory No. 01: Memory1 02: Memory2 03: Memory3 x2 Custom name (ASCII code) NAMEGC? x1 ✔ ✔ Parameter Same as the 1st parameter for NAMEGC Return code Same as the 2nd parameter for NAMEGC