Attention Check the shape and orientation of the connectors on any cable you plan to connect. Do not force a connector into a port if it does not fit. The device or your projector could be damaged or could malfunction. Do not turn on the input source before connecting it to the projector. Doing so could damage the projector. If necessary, use an adapter that allows you to connect to an input port on the projector. Projector Parts - Interface 13 Name Function B Audio Out port (Stereo mini pin jack) Outputs audio from the current input source to an external speaker. You can also connect the projector to an amplifier with speakers.
To output audio from the speaker connected to this port, select Projector as the Audio Out Device setting in the projector's Settings menu. When an audio/video system is not connected to the projector, audio is output from the speaker connected to this port even if Audio Out Device is set to AV System. s Settings > HDMI Link > Audio Out Device If you want to output audio for the HDMI source from the external speakers when the projector is turned off, select Always On as the A/V Output setting in the projector's Extended menu. s Extended > A/V Settings > A/V Output C RS-232C port (Mini D-Sub 9-pin, male) Use to connect an RS-232C cable to control the projector from a computer.
D Remote port (Stereo mini pin jack) Connects the remote control to the projector using the optional remote control cable set and inputs signals from the remote control. When the remote control is connected, the remote receiver on the projector is disabled. E Cable holder Pass a commercially available cable tie through here to secure cables. Warning Do not bundle the power cord to the other cables. Otherwise, a fire may occur. Name Function A Computer port (Mini D-Sub15-pin, female) Inputs image signals from a computer.