The following sections explain the projector parts and their functions. All of the features in this guide are explained using illustrations of EB-992F unless otherwise mentioned. g Related Links • "Projector Parts - Front" p.20 • "Projector Parts - Rear" p.21 • "Projector Parts - Base" p.22 • "Projector Parts - Control Panel" p.23 • "Projector Parts - Remote Control" p.24 • "List of Functions" p.11 Projector Parts - Front Projector Parts and Functions 20 Name Function Warning Do not look into the vents. If the lamp explodes, gases may escape and small fragments of glass may be scattered which could cause an injury.
Contact a doctor if any fragments of broken glass are inhaled or get into the eyes or mouth. Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent. Hot air from the air exhaust vent could cause burns, warping, or accidents to occur. B A/V Mute slide lever Slide the knob to open and close the lens cover. C Foot release lever Press the foot release lever to extend and retract the front adjustable foot. D Lens cover Close when not using the projector to protect the lens. By closing it during projection you can hide the image and the sound.
E Front adjustable foot When the projector is set up on a surface such as a desk, extend the foot to adjust the position of the image. F Lens Images are projected from here. G Remote receiver Receives signals from the remote control. H Horizontal keystone slider Corrects horizontal distortion in the projected image. I Air intake vent (air filter) Takes in air to cool the projector internally. Name Function A Air exhaust vent Exhaust vent for air used to cool the projector internally.