Warning Projector Setup and Installation Options • Do not cover the projector's air intake or air exhaust vents. If the vents are covered, the internal temperature could rise and cause a fire. • Do not use or store the projector in locations where it will be subject to dust or dirt. Otherwise, the quality of the projected image may decline, or the air filter may become clogged, resulting in a malfunction or fire. • Do not install the projector on an unstable surface or in a location beyond the weight specifications of the projector. Otherwise, it could fall or topple causing an accident and injury.
• When installing the projector in a high position, take measures to prevent falling by using wires to ensure safety in an emergency, such as an earthquake, and to prevent accidents. If it is not installed correctly, it could fall causing an accident and injury. • Do not install in locations where salt damage could occur, or in locations subject to corrosive gas such as sulphuric gas from hot springs. Otherwise, corrosion could cause the projector to fall. It could also cause the projector to malfunction. You can set up or install your projector in the following ways: Front/Rear Front Ceiling/Rear Ceiling Attention • Do not operate the projector on its side.
This may cause the projector to malfunction. • If you are using the projector at altitudes above 1,500 m, set the High Altitude Mode setting to On in the projector's menu to ensure the projector's internal temperature is regulated properly. Make sure you select the correct Projection option in the projector's Extended menu according to the installation method being used. s Extended > Operation > High Altitude Mode • Try not to setup the projector in locations subject to high humidity and dust, or in locations subject to smoke from fires or tobacco smoke.
g Related Links • "Projection Modes" p.49 g Related Links • "Projector Setup and Installation Options" p.28 • "Projection Distance" p.28 • "Image Shape" p.53 • "Projector Setup Settings - Extended Menu" p.139 Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector Projector Placement 28