Epson L-6034VW Maintenance Guide Before Inspections 8 Caution Check that the lamp has cooled sufficiently before replacing the lamp in the additional UV lamp curing unit. Burns could occur if you touch them while in operation or immediately after operation. If a burn does occur, run it under cold water immediately and consult your doctor. Do not push the carriage unit or the light shield inside the press. This could cause the press to malfunction or breakdown. a. Main unit front b. Main unit rear When checking the corona treater, make sure you wear long sleeves and heat-resistant gloves that are capable of withstanding temperatures of 250˚C or more (example:
AS ONE heat-resistant gloves, serial number: 1-2769-01, model number EGG-420). The electrode axis of the electrode cartridge remains extremely hot for a while after performing electrical discharge. When removing the electrode cartridge, do not touch any areas except for the handle and the frame. If you touch any other areas, burns and injuries could occur.