Chapter 2 Before Setting Up 2-1 Connecting the AC Adapter to the Printer n Plugging in AC adapter CAUTIONS: * Before connecting the printer to the power supply, make sure that the voltage and power specifications match the printer’s requirements. - Using an incorrect power supply can cause serious damage to the printer. Connect the AC adapter according to the following procedure. Њ Make sure the printer is turned off. Ќ Plug the power cable connector into the printer’s power connector with the ar- row mark facing upward.
(You can remove the power cable by grasping the connector firmly at the arrow mark and pulling straight out.) ower Connector ower Connector Frame Ћ Plug the power cord into the outlet, and turn on the power. Џ Be sure to ground the printer with the frame ground screw on the board at the rear side of the unit via a F.G cable. 5