Џ Turn on the printer. ђ While leaving some slack in the roll paper, insert the end of the roll paper straight into the paper inlet. The printer automatically feeds the roll paper into the printer. ‘ Press the FEED switch to continue feeding the paper until it extends about 20 cm beyond tear-off edge. ’ Remove the take-up spool from the take-up frame. Remove the side of the spool and insert the end of the paper roll (journal paper when using 2-ply paper and 3-ply paper) into the groove on the spool and wrap the roll paper around the spool two or three times. Install the flange to flange shaft. 12